EDUP EP-AB003 2.4Ghz 8W 802.11n Wireless Wifi Signal Booster Repeater Broadband Amplifiers for Wireless Router adapter

EDUP EP-AB003 2.4Ghz 8W 802.11n Wireless Wifi Signal Booster Repeater Broadband Amplifiers for Wireless Router wireless adapter

Note:

Your device must be SMA antenna detachable Connector when used it , for example SMA detachable antenna router

Please comfirm that you device output power range is between 3dBm and 20dBm,only that the wifi signal booster could work well .

Features:

Low-noise receive gain

Signal activity LED indicates

High Gain, High Value, High Performance

Maximum output power of 8000mW by the Booster

Plug-and-play, Easy installation, no driver needed

Ideal for increase the 2400-2500Mhz frequency devices

Increase the effective range and coverage area of your Wi-Fi network

Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow

The amplified wireless signal may even penetrate complex environments with many walls and obstacles

Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only)

Specifications:

Operation Range: 2400-2500 MHz.

Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.

Frequency Response: ± 1dB over operation range.

Input Power: 3dBm (Min.)-20dBm (Max.).

Output Power: 8000mW/39dBm nominal 

Connector: SMA Receptacle, 50 ohm.

Transmit Gain: 16-18dBm nominal.

Receiver Gain: 10-12dBm.

Receive Noise Figure: 3.0dBm nominal.

Operating Temperature: -40 to 70 degree.

Operating Humidity: Up to 95% relative humidity.

Material: Cast Aluminum

INPUT：100-240V 0.3A  50/60HZ

OUTPUT:12V  1.5A

Package content:

1*Booster

1*Power plug

1*SMA cable